Collections
Hydroponics
Hydroponics Simulator37 entries
Browse entriesHydroponics
Contents: Planting and overnight processing · Water, nutrients and health · Harvest, sizes and returned seeds · Crop definitions and defaults · Sixteen harvest specifications · Night-time effective-cycle order · Complete water-damage bands · Species harvest and seed-return branches · Bloomberry grade probabilities · Special modules · Operation and shared-rule boundaries
Planting and overnight processing
- Put an owned seed in the seed slot, a liquid container in the water slot, and install a power source.
- Install compatible general or hydroponic modules before starting. Base speed is 8 processing points per cycle and base power use is 8 kJ/cycle; modules modify these values.
- Supply the required power and liquid; see night-time processing for the complete checks and order. A growing plant cannot be removed directly; use a hatchet on the system to clear it and end that planting cycle.
General power and module rules are in machines and processing.
Water, nutrients and health
Enough total liquid permits operation but does not guarantee suitable water quality. Mineral nutrients, pollution and seed genetics affect health and harvest.
| Condition | Health effect |
|---|---|
| Mineral concentration below crop target minus tolerance | −1.00 health per processing point |
| Concentration above target plus tolerance | −0.50 health per processing point |
| Concentration inside the range, endpoints included | Neither deficiency nor excess damage above |
| Heavy metals, chemicals, microbes, organic waste, acid or alkali | Damage calculated separately from concentration, seed sensitivity and pollutant multiplier |
See water-damage bands for values and night-time processing for their execution order.
Nutrifruit's base mineral target is 1.50% of water volume with a 1.00 percentage-point tolerance: 0.50%–2.50%. It consumes 50 µL minerals per progress point and 100 mL water per valid cycle. Genetics can change the actual seed's water demand, tolerance, health and pollution sensitivity; use its own data.
See water processing for sources and treatment, and plant DNA editing for genetics and editing.
Harvest, sizes and returned seeds
Ordinary crops consume the input seed on completion. Perennials retain the plant, reset health and begin another fruiting cycle. They use their specific repeat-fruiting workload when provided; otherwise it is 50% of the full workload, rounded, with a minimum of 1.
The following applies to crops using the shared health tiers. Actual counts, allowed sizes and quality adjustments still depend on the crop.
| Harvest health | Shared size distribution |
|---|---|
| ≤15 | All small |
| 16–30 | Approximately 70% small, remainder normal |
| 31–50 | Approximately 30% small, remainder normal |
| 51–70 | All normal |
| 71–80 | Approximately 20% large, remainder normal |
| 81–90 | Approximately 70% large, remainder normal |
| ≥91 | At least all large; further tiers require a crop that permits huge size |
Percentage-derived counts are truncated and the remainder goes to the other tier. For crops permitting huge size, health 96–99 with quality bonus no higher than 50 produces roughly half large and half huge. Health 100, or a quality bonus above 50 in that branch, can produce all huge. Health no higher than 95 produces no huge items.
Returned seeds first depend on the crop and health, then the seed-yield genetic multiplier. Seeds are not guaranteed every cycle. See night-time processing for output placement and full-inventory limits.
Crop definitions and defaults
Workload is in processing points, not nights. Yield bases exclude machine quality, modules and health. Mineral concentration uses pure-water volume as its denominator; 100 in the target/tolerance table equals 1%.
| Crop | Work: definition / default (then refruit) | Count: definition / default | mL/cycle: definition / default |
|---|---|---|---|
| Nutrifruit | 23 / 16 | 5 / 7 | 100 / 100 |
| Kotton | 32 / 43 | 9 / 13 | 176 / 250 |
| Dream Cap | 28 / 28 | 8 / 8 | 100 / 100 |
| Coffee | 21 / 21 | 8 / 8 | 100 / 100 |
| Fillerweed | 11 / 8 | 4 / 5 | 287 / 451 |
| Hydroreed | 18 / 18 | 0 / 0 | 20 / 20 |
| Bloomberry | 18 / 22; 10 / 12 | 8 / 6 | 100 / 100 |
| Crop | Nutrient center ± tolerance | Minerals µL / point | Species damage factor |
|---|---|---|---|
| Nutrifruit | 150 ± 100 | 50 | 1.0 |
| Kotton | 350 ± 150 | 75 | 1.26 |
| Dream Cap | 250 ± 75 | 30 | 1.01 |
| Coffee | 250 ± 75 | 30 | 1.01 |
| Fillerweed | 100 ± 100 | 75 | 0 |
| Hydroreed | 100 ± 100 | 25 | 0 |
| Bloomberry | 200 ± 75 | 50 | 1.25 |
Definition values precede innate traits; defaults include them. Bloomberry’s 18÷0.8=22.5 rounds to 22 by Unity ties-to-even rounding; refruit 10÷0.8=12.5 rounds to 12. New seeds have base starting health 100%. Concentrations use actual water as denominator. Fillerweed and Hydroreed have zero contaminant damage but can still suffer excess minerals.
Sixteen harvest specifications
| Variant | Base value | Mass g | Base / default kcal | Sprite px | Static grid mask |
|---|---|---|---|---|---|
| Small Nutrifruit | 8 | 150 | 144 / 180 | 16×16 | 1 |
| Nutrifruit | 12 | 250 | 240 / 300 | 32×32 | 11 / 11 |
| Large Nutrifruit | 18 | 400 | 384 / 480 | 32×32 | 11 / 11 |
| Huge Nutrifruit | 32 | 800 | 768 / 960 | 48×48 | 111 / 111 / 111 |
| Small Kotton Fiber | 36 | — | — | 16×16 | 1 |
| Kotton Fiber | 46 | — | — | 16×32 | 1 / 1 |
| Large Kotton Fiber | 60 | — | — | 32×32 | 11 / 11 |
| Small Dream Cap | 17 | 20.5 | 61 / 61 | 16×16 | 1 |
| Dream Cap | 23 | 32.5 | 97 / 97 | 16×32 | 1 / 1 |
| Large Dream Cap | 31 | 75 | 225 / 225 | 32×32 | 11 / 11 |
| Small Meal Cap | 13 | 20.5 | 123 / 123 | 16×16 | 1 |
| Meal Cap | 19 | 32.5 | 195 / 195 | 16×32 | 1 / 1 |
| Large Meal Cap | 27 | 75 | 450 / 450 | 32×32 | 11 / 11 |
| Nightmare Cap | 26 | 32.5 | — | 16×32 | 1 / 1 |
| Small Fillerweed | 7 | — | 155 / 90 | 16×16 | 1 |
| Fillerweed | 11 | — | 259 / 150 | 16×32 | 1 / 1 |
Base value is not a transaction price. Base calories precede genetics; default calories include the innate effect once. — means the listed constructor excerpt does not set the field, not zero. Grid masks derive from current sprite alpha in 16-pixel cells, top to bottom with 1 occupied, not live inventory observation. Neutralized Meal Cap is a display name on an item created from dream_cap; this does not prove a direct source for the separate meal_cap ID.
Night-time effective-cycle order
| Order | Operation |
|---|---|
| 1 | Check seed, power and full-cycle total liquid; missing requirements prevent progress |
| 2 | Draw cycle power; the first start initializes health and locks the seed and modules, then advances that same night |
| 3 | Advance machine progress first; read the full current processing speed |
| 4 | For every full-speed point, check and consume minerals, then apply six contaminant damage checks |
| 5 | Consume one cycle of liquid, then run Smuggler, species and genetic growth hooks |
| 6 | Update seed progress; harvest if machine progress is complete; Perennials reset health and refruit, otherwise finish and destroy the parent |
| 7 | Return to the machine and execute module-action callbacks |
Even with less remaining progress than the current speed, mineral and contaminant processing use the full speed while cycle liquid is consumed once. There is no health≤0 early-death check; destruction after harvest is not immediate death from low health. Low health still progresses to harvest, using the corresponding yield and size tier. Outputs try the output grid and then shop inventories. If every accepting inventory is full, unplaced new items are destroyed; this is not automatic full-output pausing.
Complete water-damage bands
For each processing point, check minerals first: below the interval loses 1 health, above it loses 0.5, with both endpoints included; then remove that seed’s mineral usage per point. Six contaminants are checked separately: heavy metals, chemical contaminants, microbes, organic waste, acid and base. Physical contamination is not in this damage list.
Contaminant concentration=floor(contaminant volume×10000÷water volume), capped at 1000000. No contaminant returns 0; contamination without water returns 1000000. Multiply by genetic sensitivity, round nearest with ties to even and cap at 1000000 to obtain c. The table’s base damage is represented internally in 0.01-health units, multiplied by species damage and truncated before deduction. Each ingredient is deducted separately; do not combine both multipliers before selecting the band.
| c | Base health damage per contaminant / point |
|---|---|
| ≤10 | 0 |
| 11–15 | 0.15 |
| 16–20 | 0.2 |
| 21–25 | 0.3 |
| 26–30 | 0.4 |
| 31–40 | 0.6 |
| 41–60 | 0.8 |
| 61–100 | 1.6 |
| 101–200 | 3.2 |
| >200 | 6.4 |
Species harvest and seed-return branches
Nutrifruit
Requests 3 same-species seeds, then splits harvest count+number of Nutrifruit modules into sizes. Low health changes size without reducing total count. Small, regular, large and huge are possible. Innate Infertile X leaves roughly a 0.01% chance per seed request, rather than guaranteeing 3 seeds. Story liberation removes Infertile only from newly generated seeds, not existing ones; see Plant DNA Editing.
Kotton
Fiber is reduced by health and split into small, regular or large, with no huge size. Health ≤50 requests 1 seed; 51–80 requests 1 plus a 50% chance to request another; >80 requests 2. Each request still passes through the genetic seed multiplier. Auto Loom produces fabric equal to the total after that health split.
Dream Cap
Requests one spore return. Innate Fertile I makes this 1 spore plus a 25% chance of another. Add 2×Neutralizer module count before health reduction. With no conversion it produces three Dream Cap sizes; Neutralizer produces the three Meal Cap sizes; Nightmare without Neutralizer converts the split total into one standard Nightmare Cap size. Neutralizer wins. Spores start at contraband level 1; products and modules have their own contraband states.
Coffee
The harvest is plantable Coffee Beans, with no separate extra-seed return. Health ≤15 / ≤30 / ≤50 / ≤70 multiplies the count by 0.5 / 0.6 / 0.7 / 0.8; above 70 uses the full count. Round nearest with ties to even and request at least 1 bean, then apply the same-species seed multiplier. Beans inherit all parent traits, clear their own heat, and receive production and potency effects allowed on seed produce. They are blendable chemical feedstock, with innate Caffeine and Coffee Bean Mush production.
Fillerweed
Regular count=max(1, harvest count−1), plus exactly 1 small item, for at least 2 products. Health does not select their sizes. A Production module first adds 4 and suppresses all seed return; multiple modules still add only 4. Without it, request 1 seed and a second with 50% chance.
A zero species contaminant-damage coefficient does not remove water requirements or mineral damage. The default nutrient interval is 0–200 (0%–2% relative to actual water); above 200 causes excess-nutrient damage.
Hydroreed
Produces no ordinary food. Each Filter module yields 1 Hydroreed Filter; without a module there is no filter. It requests 1 seed plus a 50% chance to request another. Innate Dense I changes a harvested filter’s base durability from 200 to 250.
Innate Purifying IV requests roughly 28.2843% of each eligible ingredient per effective cycle, at least 1 mL each, subject to residue floors. Minerals are excluded and removed volume becomes water. This runs after health damage and cycle liquid use. The species contaminant coefficient is zero, but excess nutrients can still damage health. See Plant DNA Editing for the purification calculation.
Bloomberry
Innately Perennial: harvest preserves the plant, resets health and starts refruiting. Default initial workload is 22 and refruit workload is 12. Each harvest uses the count, at least 1 berry, and rolls each berry’s grade independently from health. This branch requests no extra seeds; a seed multiplier alone does not generate seeds. Clear the plant with a hatchet.
All same-species seed requests use integer copies plus a fractional-probability extra; offspring inherit current parent ranks and clear offspring editing heat. Maturity does not clear a Perennial parent’s editing heat. Machine quality uses its own conversion ratio and modifies the count before the species branch. See Plant DNA Editing for the full DNA algorithm.
Kotton and Dream Cap use the reduction table below. Nutrifruit does not reduce total count, Coffee uses its own factors, and Fillerweed has a fixed-small-item branch. Multiply the count and round nearest with ties to even before splitting sizes.
| Health | Kotton / Dream Cap count factor | Coffee count factor |
|---|---|---|
| ≤15 | 0.5 | 0.5 |
| 16–30 | 0.65 | 0.6 |
| 31–50 | 0.8 | 0.7 |
| 51–70 | 0.9 | 0.8 |
| >70 | 1 | 1 |
Before this table, add count×adjusted machine quality÷100 to the plant count and round positive halves upward. See machines and processing for the conversion from module quality to adjusted machine quality. Genetic yield applies before machine quality; specialist additions follow each species branch’s order.
Bloomberry grade probabilities
| Harvest health (integer) | Moldy | Under/overripe looks | Normal | Small |
|---|---|---|---|---|
| ≤25 | 55% | 45% | 0% | 0% |
| 26–55 | 25% | 45% | 30% | 0% |
| 56–85 | 0% | 25% | 45% | 30% |
| ≥86 | 0% | 0% | 40% | 60% |
Rolls are independent for each berry. The under/overripe category has two under-ripe looks and one over-ripe look, equally likely; they are not all unripe. Brewing scores for the four categories are −1, 0, 1 and 2 respectively; Small has score 2. Bloomberry has 150 base calories, subject to later genetic modifiers.
Special modules
Nutrifruit Hydroponic Module
| Performance | Efficiency | Quality |
|---|---|---|
| -10% | -10% | 0% |
For a Nutrifruit harvest, each module adds 1 item before health determines sizes.
Dream Cap Neutralizer Hydroponic Module
| Performance | Efficiency | Quality |
|---|---|---|
| +15% | +15% | 0% |
Each module adds 2 items to a Dream Cap harvest and converts it to Meal Cap. It clears the seed’s contraband state, takes priority over Nightmare conversion and blocks the innate production trait from adding Dream Cap mush.
Kotton Auto Loom Hydroponic Module
| Performance | Efficiency | Quality |
|---|---|---|
| -50% | -100% | 0% |
The post-health-split Kotton total becomes Kotton Fabric. The conversion checks for presence only; extra modules do not repeat or multiply it.
Dream Cap Nightmare Hydroponic Module
| Performance | Efficiency | Quality |
|---|---|---|
| -33% | -50% | 0% |
Converts a Dream Cap harvest to Nightmare Cap only when no Neutralizer is present. Extra copies do not add conversion counts. The crop’s innate Dream Cap mush production also becomes Nightmare Cap mush. The module itself is contraband level 3.
Fillerweed Production Hydroponic Module
| Performance | Efficiency | Quality |
|---|---|---|
| 0% | -25% | 0% |
Adds 4 to the Fillerweed count and suppresses all seed return. Presence is checked once; multiple copies still add only 4.
Hydroreed Filter Hydroponic Module
| Performance | Efficiency | Quality |
|---|---|---|
| 0% | -15% | 0% |
Each module produces 1 Hydroreed Filter at a Hydroreed harvest. Its seed-return branch is processed separately.
Hydroponic Smuggler Module
| Performance | Efficiency | Quality |
|---|---|---|
| 0% | 0% | 0% |
Clears the growing seed’s contraband tag during an effective growth cycle. It does not remove chemical constituents from the harvest; product legality is checked from its own state. Repeated copies are unnecessary for this effect.
Operation and shared-rule boundaries
See trading, machines, Wilds network and starting stock for shared rules.
Source: 0.46D, Build 26337366; static analysis, not an in-game test. This revision checks the Fillerweed Production module’s seed-return behavior against Build 26525552.
37 of 37 entries

































