Evaporator

P and Q are the current performance and quality bonuses in percent. Here round uses midpoint-to-even rounding. Recovery is limited by destination capacity. Evaporative components are removed even without a receiving container. Wine poured from a bottle can supply Alcohol for the Solvent Recovery Module.

Properties

Base value
300 credits
Grid shape
Not recorded

Chemistry and pharmacy

Evaporator

Evaporator

PropertyValue
Base value (credits)300
Base energy per night6
Base evaporation cap per night300 ml
Module grid4 × 4

Overnight processing

  1. Fit a power source and place an owned, non-empty liquid container in the ingredient slot.
  2. To recover vapor, fit another owned liquid container in the distillate slot and provide a positive quality bonus.
  3. At night, the machine checks for evaporative components and successfully draws power before processing. Water, Alcohol and Lipobond Agent evaporate; other components remain.
ParameterCalculation and limits
Evaporation allowanceround(300000 × max(0, 1 + P/100)) μl
Actual removalSmaller of allowance and available evaporative volume
Component allocationProportional integer division; the final component receives the remainder
Recovered volumeround(component removal × clamp(Q, 0, 100)/100)

P and Q are the current performance and quality bonuses in percent. Here round uses midpoint-to-even rounding. Recovery is limited by destination capacity. Evaporative components are removed even without a receiving container.

Making pure Alcohol

Pouring one finished wine bottle into a container with enough room yields 750 mL of mixed liquid, including 150 mL Alcohol. Put that container in the evaporator’s ingredient slot, install the Evaporator Solvent Recovery Module, fit a separate empty owned liquid container with spare capacity in the distillate slot, and provide power. The module makes the recovery branch transfer only Alcohol, so an initially empty receiver can collect pure Alcohol. The amount recovered each night depends on the evaporation allowance, quality bonus and receiver capacity. Water and other evaporative components are still removed, and unrecovered amounts are lost. See the table above for the exact formulas.

Modules and stopping conditions

  • Accepts universal and evaporator-specific modules; the Chemical Equipment Module is incompatible. Efficiency changes power use, performance changes the allowance, and quality changes vapor recovery. Shared calculations are in Machines and processing.
  • With the Evaporator Solvent Recovery Module installed, only Alcohol is recovered. Water and Lipobond Agent are still removed from the ingredient container.
  • No processing occurs without a power source, successful power draw, a non-empty ingredient container, and at least one evaporative component. Performance at or below −100% gives a zero allowance; the power check precedes this calculation.
  • Dryness means at most 100 μl of all evaporative components combined; see the Chem Finisher.

Acquisition

Provided by the Chemist start and the Retired Chemist referral package. The Retired Chemist attempts to stock one during each visit. See Retired Chemist visits and full stock for visit conditions and other stock.

Source: Build 26337366 / 0.46D; checked against extracted code and localized text.

Comments

0

Loading comments…