Shop operationsProbably Stolen WikiNov 13, 202611 min read152 views0 comments

Probably Stolen Hydroponics Guide: Fillerweed, Hydroreed, BloomBerries, and Plant Genetics

Start with Fillerweed, match water to all seven crops, use Hydroreed to purify large batches, and expand into BloomBerries, coffee, and plant genetics.

HydroponicsHydroreedBloomBerryPlant Genetics

Start one machine on Fillerweed for food and seeds for the next crop. Put the other to work purifying water once you get Hydroreed. When you have a steady supply of water and batteries and a market for the harvest, expand into BloomBerries, Nutrifruit, or ingredients for chemistry. Plants need minerals within a specific range, so prepare separate water for growing and for sale.

Plant your first crop and run the machine overnight

  1. Get the equipment. The Hydroponic Grower starts with 450 Credits, an initial rent of 240, and the Retired Farmer already unlocked. You get two used Hydroponic Systems with batteries and containers of Ghostwater, two Fillerweed Seeds, two Nutrifruit Seeds, and nutrient tablets. Check the actual speed and power draw of both used systems. Other occupations can unlock the Retired Farmer through Wild for a base cost of 350 and receive a starter system, seeds, nutrient tablets, and water.
  2. Load water, a seed, and a battery. Open the Hydroponic System, place a liquid container you own in its water slot, and put the seed in its own slot. For Fillerweed, check that the container holds at least 451 mL and that the machine runs at a speed of at least 8. It should finish overnight. Fillerweed takes no health damage from the six tracked contaminants. A mineral concentration of 0%–2% is suitable, so you can usually save your nutrient tablets.
  3. Set aside a seed at harvest. Without a Fillerweed Production Hydroponic Module, an unmodified seed returns 1 seed each harvest with a 50% chance of another 1. Keep one for the next crop and use or sell the rest of the harvest. The production module adds 4 plants and stops seed return. Additional copies of that module still add only 4.
  4. Choose a job for the second machine. If you need cleaner water, buy Hydroreed from the Retired Farmer. If water is already sorted, try growing Nutrifruit in clean water with a nutrient tablet. The Retired Farmer also sells seeds, nutrient tablets, Plant Analyzers, and AquaScans. Clear the trade counter before speaking to the vendor, especially when large items are on the stock list.

Choose among the seven crops

The table includes each unmodified seed's innate traits. Nights assume 8 work points per night, enough water and power, and no interruption. Base yields are before machine Quality, crop modules, and plant health. Measure minerals as mineral volume ÷ pure-water component volume. A scanner's share of the whole mixture uses a different denominator.

CropWork points / nights at base speedLiquid per nightMineral rangeBase yield and use
Fillerweed8 / 1 night451 mL0%–2%5 plants, typically 4 normal and 1 small. Replant, eat, or use it as a genetics project later.
Hydroreed18 / 3 nights20 mL0%–2%Purifies on every active night. Returns seeds at maturity and produces filters with its dedicated module.
Nutrifruit16 / 2 nights100 mL0.50%–2.50%7 fruit. Health determines size. Default Infertile X makes seed return unreliable.
BloomBerryFirst crop 22 / 3 nights, then 12 / 2 nights100 mL1.25%–2.75%6 berries. The plant fruits again automatically without returning seed. Use it for winemaking.
Coffee Beans21 / 3 nights100 mL1.75%–3.25%8 beans. Save at least one to replant, then sell or process the rest.
Dream Cap28 / 4 nights100 mL1.75%–3.25%8 mushrooms. Health affects size and quantity. An unmodified seed returns 1 spore with a 25% chance of another 1.
Kotton43 / 6 nights250 mL2.00%–5.00%13 items. Useful as filter material or as an ingredient. Seed return depends on health. The loom module changes the output and slows the machine.

Kotton needs more minerals and liquid than most crops. At base speed with no modules, budget about 1.5 L and 48 kJ per crop. Coffee needs about 300 mL and 24 kJ over three nights. If you are supplying chemistry, compare usable ingredients per harvest, including the extra mush you get from larger mushrooms. With a harvest health of 91 or higher, Dream Caps normally all come out large. Poorer health can lower both size and quantity. Leave the neutralizer out if you need Dream Cap mush for Dream Dust. It produces edible Meal Caps and takes priority over the Nightmare Cap conversion. Use the Nightmare module when you want Nightmare Caps.

Mix nutrient water and keep plants healthy

  • A Hydroponic Nutrient Tablet adds 15 mL of minerals. If there is room in the container, a tablet in 1 L of uncontaminated water puts minerals at about 1.50% relative to pure water. That suits Nutrifruit and BloomBerry. The same tablet in 600 mL gives about 2.50%, suitable for Coffee and Dream Caps. In a full container, the minerals displace water. If you start with Rustwater or water from Hydroreed, account for the minerals already present.
  • Give the mixture some headroom. At each 1 work point, the machine checks mineral concentration before taking up that seed's mineral requirement. Below the range costs 1 health point per work point. Above it costs 0.5. Both endpoints are safe. Nutrifruit consumes 0.05 mL of minerals per work point. BloomBerry keeps using minerals as it fruits, so recheck the mixture between harvests. Even if the crop is almost done, the machine performs its full set of checks on the last night. It draws the nightly liquid amount once.
  • Check the individual contaminants. Heavy metals, chemical contaminants, microbes, organic waste, acid, and base each cause damage according to their concentration and the seed's sensitivity. Physical contaminants and microplastics are outside that set. Use the AquaScan to read the composition and the Plant Analyzer to check the seed's requirements. Fillerweed and Hydroreed are immune to the listed contaminant damage, but too much mineral still hurts them.
  • Water and power shortages pause growth. Low health affects the harvest. The system pauses for the night without drawing water or power if it cannot complete the cycle. A crop can grow to maturity at low health and then yield fewer or smaller items, depending on the plant. The seed and modules are locked during growth. You can still replace the water. BloomBerry stays in the machine after harvest. Use a Hatchet to remove the plant if you need the machine or want to change modules.

With zero Quality bonus, an unmodified Nutrifruit seed, uncontaminated water, and minerals in range throughout, the base machine harvests 7 huge Nutrifruit in two nights. At harvest health 96–99 and adjusted Quality of 50 or less, you get roughly half large and half huge. At 95 or lower there are no huge fruit. Adjust the nutrient water to improve health before spending on speed modules.

Hit the speed breakpoint, then improve power use or yield

The Hydroponic System starts at 8 points per night and draws 8 kJ per night. Each +25 percentage points of positive total Performance gives 1 more work point. Check the final speed after fitting modules. A crop-specific module can push the machine back below your target.

GoalMinimum speedTotal Performance from baseWhat changes
Harvest Fillerweed overnight80%Keep this speed for the starter crop.
Grow Dream Caps in three nights instead of four10+50%Finish 28 points in three nights and save a night of water.
Grow Coffee in two nights instead of three11+75%Finish 21 points in two nights.
First BloomBerry harvest in two nights, then one per night12+100%A repeat harvest needs 12 points, a good target for winemaking.
Harvest Nutrifruit overnight16+200%Keep up the supply of seeds and suitable water.

Hydroreed purifies every active night. Speed sets when you harvest seeds and filters. At 6 points of speed, it still finishes in 3 nights with 18 work points, so the purification machine can give up Performance for Efficiency. Quality helps with quantity. For unmodified Nutrifruit, total Quality of +50% counts as +25% for yield. Rounding 7 × 1.25 gives 9 fruit, then each dedicated module adds +1. The increase depends on the starting yield, so 25% will not add the same number to every crop.

Purify larger batches with Hydroreed

  1. Start with a jug and scale up the container when sales justify it. A Water Tank starts at 20 L and can be upgraded to 50 L. Scrap Metal adds 2 L per piece. Metal ingots add 4 / 6 / 8 / 10 / 14 L depending on grade, capped at 50 L. The Retired Water Merchant tries to place a Water Tank for sale. It may fail to appear if the trade counter lacks space.
  2. Scan the raw water and run Hydroreed overnight. Default Purifying IV attempts to remove about 28.28% of each eligible contaminant per night, with a minimum request of 1 mL per contaminant. Each has a residual floor. Removed contaminants become water after the plant has taken its nightly liquid. The trait works on chemical contaminants and heavy metals and leaves minerals in the water. Growth still takes up a little mineral. Replant when the reed finishes its three-night crop to keep the batch moving.
  3. Split growing water from water for sale. Keep the minerals for plants and adjust them to suit the crop. For sale, use a filtered pitcher to take out minerals and larger particles, use a UV Lamp for microbes, and check whether chemical contaminants or heavy metals still call for the purifier. Ordinary filters leave both in the water, and tablets leave heavy metals. If the purifier is finishing a batch of Pure Water, reach +100% total Quality and give it enough nights to finish.

A large tank reduces the number of pours. The nights required depend on the starting water and what remains after treatment. With 100 mL of a single contaminant and ignoring plant liquid use and the residual floor, about 26.5 mL remains after four nights of default purification. The video case that turns 50 L of Rustwater into High-Quality Water in four or five nights uses additional steps, typically filtration or a tablet. Scan each batch before choosing how to finish it. For a filter supply, fit the Hydroreed module. Each module gives 1 filter at harvest with 250 durability on unmodified Hydroreed.

Pick what to grow for the midgame

  • Winemaking. Prepare low-contamination nutrient water with Hydroreed and get BloomBerry to a speed of 12. Above 85 health, each berry has about a 60% chance to be Small and a 40% chance to be Normal. Both are useful for winemaking. Get bottles and yeast before adding more plants. Winemaking
  • Food. Keep seed return on Fillerweed. Once a machine meets your own needs, sell the rest. Default Infertile X Nutrifruit has about a 0.01% chance per seed attempt, so even three attempts rarely yield a seed. Find a steady seed supply before planning on regular sales of huge fruit. The story change affects newly generated seeds. Existing seeds keep their traits.
  • Chemistry. Keep a Coffee Bean or Dream Cap spore for the next crop, and supply clean water and steady power to preserve health and yield. Add systems when the workshop is waiting on ingredients and the products are selling. Scan crops with edited traits to measure their actual composition.

Keep the original seed before editing a trait

  1. Unlock Plant Genetics. Unlock the Retired Farmer first. The next unlock costs 1,250 at base price and grants a DNA Manipulator, a Gene Scanner, and four blank data disks. Check the quote for the current run, since difficulty can change the price.
  2. Extract a trait. Power the editor, place the donor seed in the target slot, and put a blank disk into the extraction or output slot. By default the machine picks an eligible trait at random. Positive or negative filters narrow the selection. Ordinary extraction consumes the donor seed. The stabilizer keeps it, and a successful extraction removes one rank of the extracted trait from that seed. Grow a spare first if the seed is valuable.
  3. Apply a trait. Put the written disk in the input slot and the recipient seed in the target slot. Check the preview for success chance, required work, incompatible traits, and rank limits. Success uses a disk charge. An application attempt also adds heat. Effective complexity is complexity + heat. Higher values mean more work and lower success odds. Returned seeds inherit the parent's traits and clear the heat. Repeat harvests from the same perennial leave its heat in place.
  4. Match the trait to the crop's job. Raise Hydroreed's Purifying rank for faster treatment or add Perennial to reduce replanting. Try a chemistry production trait on a single Fillerweed seed and scan the crop before scaling up. More traits can change liquid use, yield, and speed. In the Hydroponics Simulator, match the minerals, seed, and final machine stats to the in-game setup. The simulator lets you set ranks directly. The game requires each edit.

Applies to unmodded Probably Stolen, Steam Build 26525552. Mechanics and figures were checked against the extracted game implementation. The calculations were not tested in-game.

Probably Stolen Wiki

Independent developer building sites, games and tools.

[email protected]

Comments

0

Loading comments…