Make a batch you can scan before committing your stock to the Cartel or to ordinary sales. Coffee Beans are a good way to learn the machines. If you chose the Chemist start, also set aside ingredients and evaporator time for Dream Dust so the batch is dry before the handler arrives. For higher purity, find out whether the impurities come from the ingredients, the reagents, or the finisher.
Stock your workshop
| How to start | Equipment and cost | What to do first |
|---|---|---|
| Chemist start | 300 Credits and an initial rent of 200. You get a worn Blender, Heating Plate, Evaporator, Chem Finisher, and Composition Spectrometer, plus measuring tools, a pitcher, Kotton Fabric, and Coffee Beans. The evaporator starts with a 40 kJ power source. | Check the first delivery on day 8 and make Dream Dust early enough to test it. Use caffeine to learn the workflow or stock ordinary sales. |
| Switch from another occupation | Unlock the Retired Chemist through Wild for a base cost of 1,000. You receive starter equipment and a pack of common supplies. The Retired Chemist can supply more later. | Start with caffeine or run chemistry as a side business. This referral leaves the Chemist's first-week Cartel delivery inactive. |
Stock up on Chemical Supplies (Common), empty containers, and any missing filters. The common pack supplies alcohol, acid and base solutions, and Lipobond Agent. Scan the actual contents after opening it. Dream Caps come from the Chemist's introductory supplies, later vendors, or hydroponics. Consider growing your own once you need a regular supply. Check the Chemistry and Pharmaceuticals collection for the Retired Chemist and Dr. Jackson's stock lists, and clear space on the trade counter and in your inventory.
Take a batch from raw ingredients to finished goods
- Blend and scan. Fit a container with room in the Blender, add a blendable ingredient, and start it. Use the Composition Spectrometer to note the amount of active ingredient, unreacted mush, and impurities. Adding material to a full container can waste the mixture. Use measuring tools to split it into batches as needed.
- Heat to extract the active ingredient. Put the container on the Heating Plate and watch the actual temperature of the contents. With 0 chemical modules, the target is fixed at 99°C. With 1 it is 160°C. You can adjust it from 2 modules onward. If you cannot set a precise temperature, run it on low and switch it off as you approach the limit. Resume when it cools. Turn off the heat before leaving. Let Dream Cap mush or Coffee Bean mush react before fine filtration, which can otherwise remove the raw material.
- Treat the impurities you find. Acid or base turns protein into debris. They neutralize each other, so add a little at a time, wait for the reaction, and scan again. Use Lipobond Agent for fat. Each unit of active agent can treat up to 8 units of fat, and the bottle may contain other components. Pour into a pitcher lined with Kotton Fabric to catch coarse particles, then use a pitcher with an ordinary filter if needed. Filtration happens when you pour into the container fitted with the filter. Heavy metals and chemical contaminants pass through both. If a reagent introduced them, switch to a cleaner bottle or treat the reagent before use.
- Remove water and alcohol. Load the processed liquid and a power source into the Evaporator. Put an empty container in the distillate slot if you want to recover solvent. At base stats, an active night removes up to 300 mL of volatile components and costs 6 kJ. Give a large batch more nights or split it. Recovery depends on Quality and available container space. The solvent recovery module keeps only alcohol. Scan ordinary distillate before reuse, since it can contain both water and alcohol.
- Form and verify. Load the batch into the Chem Finisher, choose the recipe, and scan one finished unit before using the rest. Clear the output slots. Every recipe requires total volatile components ≤0.100 mL and enough mixture to form one unit. The machine checks dryness and volume, so an enabled Output button can still produce a pill with zero active ingredient. Judge the batch by active ingredient and purity as well as piece count.
Learn these two routes first
Caffeine Pills from one Coffee Bean
An unmodified Coffee Bean contains about 80 mL of blendable components, including 44.8 mL of Coffee Bean mush and 8 mL of caffeine with the default traits. A blender without chemical modules loses 35%. Scan what actually went into the container. The bean starts with some caffeine, and extracting the mush adds more.
- Blend the bean, add alcohol, and heat. Alcohol extraction starts at 50°C. If the plate is adjustable, try a target of 55°C and watch the mush fall and the caffeine rise on the spectrometer. Water extraction starts at 80°C and has a lower maximum yield. Alcohol boils away above 78.37°C, so keep the alcohol route below that point even if a video uses 100°C.
- Check protein and fat after extraction. For a practice batch, filter and dry it and form one pill. For higher purity, use small amounts of acid or base for protein and Lipobond Agent for fat, then filter once the composition stabilizes. Scan each batch of reagent so you can adjust for the impurities it brings in.
- Choose Caffeine Pill once the batch is dry. Each pill takes 5 mL of dry mix. If the caffeine share is low, check protein, oil, and the finisher's module count. The game also classifies this pill as a household good. Check each buyer's accepted categories and grades.
To reproduce a set of figures, select Caffeine Pill in the Chemistry Simulator. The preset uses 1 unmodified Coffee Bean, 200 mL of bottled alcohol, a heating target of 55°C for 60 seconds, filtration, evaporation, and finishing, with each chemical device set to level 4. This yields 11 pills at about 72.2% in the model. Protein and oil keep it at Street Standard. Using a level 0 finisher on the same mixture gives about 63.5%. Set your actual machine levels and ingredients when comparing with your shop.
Dream Dust for your first delivery
- Blend Dream Caps and record the volumes of Dream Cap mush and protein. Mushroom size affects how much mush you get, and the starter blender loses some material. Put together a full batch so you can use the evaporator efficiently.
- Measure the alcohol component itself before comparing it with the mush. Extraction starts at 40°C. Aim for an actual temperature of 40–50°C. Above 50°C, mush starts to degrade. Above 60°C, the Dream Cap extract also breaks down. When the alcohol-to-remaining-mush ratio reaches 5:1 on a reaction step, up to 50% of the mush processed on that step becomes extract and the rest becomes plant matter. The reaction leaves the alcohol available for the next step.
- If the scanner shows 22 mL of mush, you need about 110 mL of actual alcohol to reach the cap from the start. With a 70% solution, use about 158 mL. To stretch a limited supply, let each small portion of mush finish in the same warm solvent before adding the next. Recheck the ratio, temperature, and free space each time. Stop at the useful ratio to save evaporation time.
- Once the spectrometer shows the mush is gone, treat protein as needed, filter out coarse and fine debris, then dry the mixture. Each vial takes 2 mL. For the first 10 vials, budget at least 20 mL of usable dry mix and check a sample from the finisher. If the 20 mL contains 12 mL of Dream Cap extract, the mix starts at 60%. A base finisher leaves about 52.8%, above the first delivery's 40% target. Use the scan to tell the dry mixture volume from the extract volume.
Seven finished products and where to start
| Product | Volume per unit | Active ingredient and route |
|---|---|---|
| Caffeine Pill | 5 mL | Caffeine. Extract Coffee Bean mush with alcohol or water. |
| Dream Dust | 2 mL | Dream Cap extract. Start with ordinary Dream Caps and alcohol. |
| Nightmare Dust | 4 mL | Nightmare extract. Start with Nightmare Caps and alcohol. Keep actual temperature at 40–50°C. The extract degrades above 50°C. |
| Nomore Injector | 4 mL | Nomore. Combine Dream Cap extract, Reducing Agent, and Lipobond Agent. The in-game reaction needs 45–55°C and no more than 10% alcohol by total volume. Reduce residual alcohol before adding reagents, then dry the batch again before finishing. |
| Phanta Pill | 0.5 mL | Phanta. Start with N-Methylol Base from restricted supplies. Treat the Stabilizing Agent, then add Reducing Agent. The actual temperature must be ≥110°C and <130°C. Phanta degrades from 130°C. Scan each reagent and add it in small steps to account for its actual composition. |
| Zyanide Pill | 0.6 mL | Zyanide. The site simulator starts with existing pills so you can compare the mixture before and after removing physical contaminants. |
| Birth Control Pill | 0.1 mL | Contraceptive. The site simulator also starts with existing pills. Re-forming simply samples the remaining mix in proportion, so purity only improves when you remove impurities. |
Use existing Zyanide Pills and Birth Control Pills as feedstock for the verified reprocessing routes. Nomore and the similarly named Oxymore Injector are different items. For Phanta or Nomore, use the simulator to check the active component and leftover reagents at each step, then match your in-game equipment. The presets give sample outcomes, and the final grade depends on your actual batch.
Track down what limits purity
| Chemical modules per machine | Blender loss | Material replaced by contamination at finishing | Heating Plate |
|---|---|---|---|
| 0 | 35% | 12% | Fixed target of 99°C |
| 1 | 20% | 6% | Fixed target of 160°C |
| 2 | 10% | 3% | Adjustable |
| 3 | 5% | 1% | Adjustable, heats faster |
| 4 | 0% | 0% | Adjustable, heats faster again |
Purity is active ingredient volume ÷ total product volume. The seven grades from low to high are below 30% Starch Grade, 30% Junk Grade, 45% Cut Product, 60% Street Standard, 80% Near Pharma, 90% Pharma-Grade, and 99% Lab Pure. Each stated lower limit is inclusive. The finisher replaces material with contamination and keeps the same total volume. With 0 modules, even a pure mix finishes at about 88%. With 3 modules, a 100% mix finishes at about 99%, leaving little room for other ingredients. Fit 4 modules for consistent Lab Pure batches and then reduce upstream impurities.
- The mix is already impure before finishing. Turn protein and fat into debris before filtering. Check the filter type and durability for physical impurities. For chemical contaminants and heavy metals, start by scanning the reagent bottles and selecting a cleaner one. The Gutter Tilapia pretreatment shown in videos requires a water component, care, and multiple nights. Its effect has a residual floor. Ordinary tilapia lack that treatment effect. Try a small batch before relying on it.
- You are getting too little extract. Compare the amount before and after blending, then check for early filtration, overheating, or overfilling. Blender upgrades preserve material. If temperature is the problem, give the Heating Plate 2 modules first. If drying is the bottleneck, give the Evaporator enough power and overnight time.
- You need a regular ingredient supply. Hydroponics can supply Coffee Beans and several sizes of Dream Cap. Later you can give Fillerweed a trait that produces Dream Cap mush or caffeine. Scan the harvest to see what it actually contains. Mush still needs extraction. Caffeine produced directly is already the active ingredient. Use the measured yields of your own seeds to plan production.
Get through the Chemist's first week and sell the surplus
- Plan the first delivery immediately. On day 1, the handler tries to supply 3 Dream Caps and 1 pack of common chemical supplies. Clear the front counter. The day 4 check-in can provide the same materials for a nominal cost of 12 Cartel reputation, or 6 with Reliable Chemist. Leave time to dry the mix and make a second batch if needed. By day 7, set aside 10 vials of Dream Dust averaging at least 40% purity.
- Count the vials and check their actual average purity. The first weekly delivery is scheduled for day 8. The handler takes all Dream Dust directly on the front and back counters and averages their real purity. Set out only the stock for the delivery. A handover with no vials, or an average at or below one-quarter of the requirement (10% for the first delivery), triggers a game over. Aim for the quota shown in the interface.
- Expand to match the next quota. A normal settlement pays a base stipend of 150 Credits and supplies more ingredients. Meeting both quantity and purity conditions adds a chemical equipment module. Normally the next quota rises by 5 units and 5 percentage points of purity, up to a 70% purity requirement. Expand ingredient supply and drying capacity first. Leaving begins at 100 reputation and has further thresholds of 125, 150, 175, and 200 across deliveries. Finishing the exit locks the Cartel protection service. Cartel deliveries
- Sell surplus to the right buyers. Caffeine Pills work for ordinary sales. For restricted goods, check the buyer's product preferences, minimum grade, and contraband rules. A buyer with testing ability can reveal real grade. Lower Level doctors, Middle Level nurses, and Upper Level hospital suppliers get that ability with a 50%, 75%, and 100% chance respectively. Medicine such as Immunivax also has separate authenticity and condition checks. Subtract ingredients, reagents, filters, power, and overhead from actual revenue, and record module costs separately. Check demand before finishing the whole batch.
Applies to unmodded Probably Stolen, Steam Build 26525552. The items and equipment are in-game. Mechanics were checked against the extracted implementation, and example batches were calculated with the site model. No in-game tests were run for these examples.



Comments
0Loading comments…